Cutting wood is an act that is not performed every day. However, there are times when you need to do this in order to complete a DIY project or to repair furniture… Moreover, those who make the most use of a circular saw are professionals in woodworking, furniture making, or practitioners in fields that require regular use of this tool. So, how do you cut wood with a circular saw, in your opinion? We discuss it in this article.
Making a 90° cut with a circular saw
To cut wood with a circular saw, you need to ensure you have the wood and the saw in question. In case you do not have one and still wish to acquire it, please consult this site.
You may also like : How to Renovate a House?
Thus, in order to avoid splinters caused by cutting while using your circular saw, it is advisable to start working on the opposite side. So before you begin, you will need to adjust the cutting height. This will involve ensuring that the cutting blade does not exceed the lower plane by more than 5 mm. Next, securely fix the board to be cut onto a support using a clamp. Once you have done this, check that the cutting line is above the void. Then, adjust your guide according to the width of the cut to be made.
Don’t forget to take precautions before starting. Align your sight using the cutting line. To this end, be aware that some saws are equipped with a laser guide that helps align the sight with the cutting line. Additionally, do not forget to wear gloves and put on safety glasses. After that, turn on your saw and wait for it to reach its maximum power before starting to move along the cutting line. As you advance, keep the base on the cutting support while monitoring the sight axis or the cutting line.
Further reading : How to Use a Hedge Trimmer Safely?
Making a bevel cut with your circular saw
The base of the circular saw is removable and allows you to make your bevel cut up to 45°. Thus, to make such a cut, you will need to start by unlocking the screw that prevents the rotation of your circular saw. Then, make an inclination of the blade relative to the base, according to the angle you wish to achieve.
Before starting, tighten the adjustment screw. Also, make sure you are at the correct angle before cutting your board. Once this is done, you can start the saw and begin the cut. During the cut, advance the saw all the way through while keeping the base on a support, and being careful of the sight axis or the cutting line. You can stop when the guard cover returns to its original position.